Apollo
Apollo 1 in. x 100 ft. Red PEX-A Pipe, Solid Coil
Published price — same for everyone
In stock
SKU EPPR1001S
The price on the page is the price.
Find it, price it, order it — without a phone call. Questions on spec, quantity, or freight? Contact us.
Buying more than one thing? Start your list — however you have itFreight and delivery are calculated at checkout — no surprise charges.
Details
1 in. x 100 ft. Red PEX-A Expansion Pipe
Durable, flexible PEX-A pipe for potable hot water distribution. The 1 in. red solid coil resists corrosion and recoiling, delivers full-flow performance, and works with expansion, crimp, clamp, or sleeve fittings.
Key Features:
- Flexible PEX-A construction: Easy routing with fewer joints to minimize leak points
- Full-flow design: 1 in. nominal diameter supports high water output
- Heat-repairable kinks: Can be corrected during install to avoid extra connections
- Broad fitting compatibility: Works with expansion, crimp, clamp/sleeve, and push-to-connect systems
- High durability: Corrosion-resistant, ductile tubing rated up to 200°F and 160 psi
Please check the Product Data Sheet Here
Specifications Table:
| Specification | Details |
|---|---|
| Application | Potable Water |
| Color Family | Red |
| Color/Finish | Red |
| Connectivity | Barb |
| Material | Cross-Linked Polyethylene (PEX) |
| Maximum Flow Rate (gallons per minute) | 3.8 |
| Maximum Working Temperature (F) | 200 |
| Maximum Working Pressure (psi) | 160 |
| Minimum Working Temperature (F) | -40 |
| PEX Type | A |
| Pack Size | 1 |
| Pipe Features | Corrosion Resistant, Ductile, Flexible |
| Pipe or Fitting Product Type | Pipe & Tubing |
| Product Weight (lb.) | 17.2 |
| Actual Inside Diameter (in.) | 0.862 |
| Actual Outside Diameter (in.) | 1.125 |
| Nominal Inside Pipe Diameter (in.) | 1 |
| Pipe Wall Thickness (in.) | 0.1315 |
| Product Length (ft.) | 100 |
| Certifications and Listings | ANSI Compliant, ASTM Compliant, CSA Listed, NSF Listed |
| Manufacturer Warranty | 25 Years: For exclusive use with ASTM F1960 fittings |
| Pressure/Temperature Ratings | 160 psi @ 73.4°F, 100 psi @ 180°F, 80 psi @ 200°F |
| System Compatibility | Compatible with Uponor and Wirsbo systems; Tectite push-to-connect fittings |
| Installation Environments | May be installed in concrete, gypsum-based lightweight concrete, sand, asphalt, under wood flooring, or behind wallboard/plaster |
Frequently Asked Questions (FAQ):
Q: What fittings are compatible?
A: Compatible with ASTM F1960 expansion fittings, crimp, clamp/sleeve methods, and Tectite push-to-connect.
Q: Is this pipe safe for potable water?
A: Yes—PEX-A tubing is certified for potable water and meets or exceeds ASTM F876, F877 and related standards.
Q: Can it be used for hot water lines?
A: Yes, the red color identifies hot water; it is rated 160 psi at 73.4°F, 100 psi at 180°F, and 80 psi at 200°F.
Q: Where can it be installed?
A: Suitable for installation in concrete, lightweight gypsum, sand, asphalt, under wood flooring, or behind wallboard/plaster.
Q: Does the coil have strong memory?
A: Apollo PEX-A has reduced coil memory compared to regular PEX, helping it lay flat and resist recoiling.
Sculptural Utility with a Bold Red Statement
This vivid red PEX-A coil brings a modern sensibility to the unseen architecture of water. Its supple, resilient form glides through frameworks, minimizing joints while maximizing flow. Pair it with sleek brass expansion fittings for a refined, cohesive system. It’s a quiet luxury—performance-driven infrastructure that elevates everyday living.
Upgrade your plumbing with flexible, full-flow Apollo PEX-A—add this 100 ft. coil to your project today.
Third-party marks are the property of their respective owners and do not indicate sponsorship or endorsement.